Easy Assembly for Car Bus Truck Motorcycle Battery 3.7V 150Ah NCM Lithium Ion Battery Module Pack

Easy Assembly for Car Bus Truck Motorcycle Battery 3.7V 150Ah NCM Lithium Ion Battery Module Pack

Features:

30% lighter and 30% more energy dense than LiFePO4
Fast charge and discharge, Deep Cycle. 100% recyclable and non-toxic.

  • Voltage: 3.7V nominal, 4.2V max, 3.0V min
  • Long Cycle life >2000 cycles.
  • high discharge rate 4C continuous / 8C peak(10S @SOC 40~60% @20ºC~+45ºC)
  • Consistently low internal resistance. (=longer life)
  • Safe NCM chemistry, proven performance in EVs.
  • Higher energy density 257wh/kg power and the energy density of pack system has reached to 160KW/kg This means more Ah in a smaller lighter package.

An appropriate charger and battery management system is required for cell balancing and protection from overcharge and over-discharge.
Different Sizes Based on our 30Ah cell for general purpose, we can assemble 3, 4, 5 or 7 pouch in a stainless steel or aluminum casing to make 90Ah,120Ah,150Ah,180Ah to 210Ah NCM modules.

NCM Lithium battery module technical Advantage

- With our unique module design we make it easy to build small and large batteries out of NCM pouch cells.
- The plastic holders ensure a good insulation and a rugged fixation even for challenging applications.

NCM Lithium battery module feature

- Module design with terminal bolt to make easy assembly
- Double sealed design, to protect battery punctured by external forces with high strength
- Explosion proof valve module housing design make relief protection

Specifications:

Nominal Capacity 150Ah@0.3C Discharging
Minimum Capacity 150Ah@0.3C Discharging
Nominal Voltage 3.7V
Internal Resistance ≤0.2mΩ
Charging(CC-CV) Charging Current 1.0C continuous / 1.5C peak
Charging Upper Limit Voltage 4.15V
Discharging Discharging Current 3C continuous/5C(10S ≥20% SOC, 25°C)
Discharging Cut-off Voltage 3.0V
Charging Time Standard Charging 60 minutes
Quick-acting Charging 45 minutes
Operation Temperature Charging 0℃~45℃
Discharging -20℃~55℃
Weight 3.20Kg
Size / with Plastic Holders 50x135x235mm/ 53x141x252mm
Shell Material Stainless Steel 304

Prev: 3.7V 30Ah High Energy Density NCM Lithium ion Battery Cell with Long Cycle Life
Next: 3.7V 120Ah NCM Lithium Ion Battery Module Pack For EV Electrical Vehicle Cars Boats Bus